MICRODUCT CABLE#

OPTIX Cable MICRO ZW-XOTKtcdD MC201 0.15kN

9/125 ITU-T G.652D

FEATURES

• Cable for microduct installation
• Solid HDPE jacket
• Small reduced diameter
• Designed to cable blowing
• Reinforced by aramid yarns
• Resistance to high and low temperatures
• Fully dielectric construction

CABLE CONSTRUCTION#

1. Optical fibres in 0.25mm coloured coating
2. Thixotropic jelly
3. Loose tube
4. Aramid yarns
5. Ripcord to tear the outer jacket
6. HDPE outer jacket (black), UV stabilized

The OPTIX MICRO ZW-XOTKtcdD MC201 cables: are a family of micro-canalisation client cables for micro-tubes of upwards of 3.0mm in inner diameter. A lightweight construction with a small overall, strengthened by aramid yarns, water blocking gel (WB) for fibre protection, fully dielectric, a black HDPE (0.3mm) coat - resistant to UV radation, installation tension strength of 150N, temperature range between -20°C and + 70°C - an equivalent of: ZW-XOTKtcdD.

The Micro GROOVE cable has a carbonated outer shell which makes the blowing-in of the cable easier.

All cable fibres and tubes are colour coded acording to the "EIA/TIA-598" standard. Each tube containing up to 12 optical fibres is filled with a hydrophobic gel to protect the fibres from the effects of moisture and vibration. Two threads are molten into the coat (ripcords) and serve to ease the removal of the outer cable layer. The cables are meant for a pneumatic installation (blowing).

Product information
Cable version	The total amount of fibres [pcs]	Weight {kg/km} (±10%)	∅ Cable [mm] (±0.2)	∅ Tube [mm] (±0.1)	Supporting element/ Peripheral reinforcement	Reinforcing element	Coating material & thickness [mm] (±5%)	Temp. range instalation	Temp. range operating transport	Minimum bending radius temporary permanent
1T2F	2	5.2	2.5	1.1/1.6	Aramid yarns		HDPE (0.3)	-20° to +70°C	-20° to +70°C	20D/15D
1T4F	4	5.2	2.5	1.1/1.6	Aramid yarns		HDPE (0.3)	-20° to +70°C	-20° to +70°C	20D/15D
1T6F	6	5.2	2.5	1.1/1.6	Aramid yarns		HDPE (0.3)	-20° to +70°C	-20° to +70°C	20D/15D
1T8F	8	5.2	2.5	1.1/1.6	Aramid yarns		HDPE (0.3)	-20° to +70°C	-20° to +70°C	20D/15D
1T12F	12	5.2	2.5	1.1/1.6	Aramid yarns		HDPE (0.3)	-20° to +70°C	-20° to +70°C	20D/15D

Mechanical parameters	EN standard	IEC standard	2-12F
Tensile Strength Installation	EN 187000	IEC 60794-1-2-E1	150N
Tensile Strength Operation	EN 187000	IEC 60794-1-2-E1	75N
Crushing resistance	EN 187000, m.504	IEC 60794-1-2-E3	50N (100x100mm) for 60 sec.
Repeated bending	EN 187000, m.507	IEC 60794-1-2-E6	30 cycles [(20xD), 0.5Kg]